BMS Micro Rack - Long Frame Dual Hyper Bar

(2 reviews) Write a Review
Usually ships the same business day
Frequently bought together:


This rack is the same as the very popular micro rack made by Bassett Metal Studios The only difference is a second hyper bar in the third bar position, which is upside down from the top bar. It provides additional usage possibilities beyond the standard micro rack. Shown in photo on far left.

View AllClose

2 Reviews

  • 5

    Posted by Joe Keyes on 6th Oct 2020

    I like it. I have a full rack and some smc micro racks. This works just like smc. For loads over 180 lbs, use the upper hyper bar or you’ll blister your brake hand...hypothetically

  • 1
    Poor Craftsmanship

    Posted by JL on 7th Jun 2017

    I ordered the long-frame, dual-hyperbar BMS Micro Rack. Upon receipt, I took it on rope to test the rack and practice some change-overs. Pretty quickly, I noticed that the bars were chewing up the U-frame. I contacted BMS via their contact form and offered pics but never received a reply. I wound up taking apart the rack and found that the drilled holes were rough and held small, sharp ridges, probably from being drilled with a dull bit or from being drilled too quickly (or both). Given the critical function of this product, I expect better machining. I used 400 wet/dry to smooth out the nicks in the frame and polish the holes in the bars. Such extra finish work should not be necessary for a $100 rack.

View AllClose