The original and still the best solution for confined space, high angle or
technical rescue. The Sked comes equipped for horizontal hoisting by helicopter
or vertical hoisting in caves or industrial confined spaces. Constructed of a
durable plastic that provides protection for the patient while allowing
extraction through the most demanding confined spaces. The stretcher rolls for
storage in a tough cordura backpack. Weight 19 lbs.
Each SkedŽ Basic Rescue System
comes complete with:
The SkedŽ Stretcher - the
stretcher is fabricated from a special plastic formula which is both
flexible and durable. Securing straps with steel buckles are sewn into the
stretcher through brass grommets which contribute to the strength and
durability.
Cordura backpack/Towing Harness -
This durable backpack includes shoulder straps and pockets for
storing the SkedŽ accessories when not in use.
Horizontal Lift Slings - a
pair of 9,000 lb. tensile strength slings are provide for hoisting the
SkedŽ stretcher with a helicopter or other haul system in a horizontal
position.
Vertical Lift Sling - For
vertical lifting of the SkedŽ, 30 ft. of 3/8" PMI kernmantle rescue rope,
with a minimum break strength of 5,265 lbs., is provided with a figure 8
knot in the middle.
Steel Locking 'D' Carabiner -
A large locking 'D' steel carabiner is included with the system
for attaching the stretcher to a hoisting system. These carabiners are
rated at a 9,000 lb. minimum break strength.
Tow Strap - This 6 foot
strap with bronze snap hooks on each end attaches the SkedŽ stretcher to
the backpack, creating a useful towing harness which can be used in
several configurations for towing the SkedŽ by one or more people.
Removable Webbing Handles -
In addition to the four handles sewn permanently into the SkedŽ
stretcher, four additional removable handles are provided to allow the
Sked to be carried by up to 8 rescuers.
SKED STRETCHER FACT SHEET
The SKED Stretcher: a revolutionary
concept in stretcher design
PRODUCT DESCRIPTION
A rescue system that performs the functions of a stokes and basket type
stretchers, yet is much more compact, light weight, and versatile.
SIZE
Rolled in cordura pack -- 9 inch diameter x 36 inch length
Laid out flat -- 3 feet x 8 feet
WEIGHT
19 lbs. complete with accessories listed below.
MATERIAL
Low density E-Z glide polyethylene plastic.
** Nylon webbing
** Solid brass grommets
** Steel buckles
TEMPERATURE RANGE
Begins to melt 450 degrees F to 500 degrees F
** Usability to - 120 degrees F without becoming brittle.
HORIZONTAL LIFT SLINGS
Webbing tensile strength 10,000 lbs.
VERTICAL LIFT SLING
Rope tensile strength 5,800 lbs.
Please note that, depending on shipment method selected, this item may
incur additional shipping charges. If it does, you will be notified of any
excess charges, for your approval, prior to shipment. The Olive Drab Green typically retails for $530.00 which is why the additional charge for the Olive Drab color below.
The spinal immobilization/extrication device of its type that meets all of
the established criteria for immobilizing a sealed patient. The OSS II is an
ideal companion for the Sked Stretcher system. The OSS II provides for safe
removal of patients from injury sites without doing further damage to the spine
if properly used. The OSS II can be used in place of a conventional short
backboard and as a hip or leg splint. The OSS II includes a shoulder board, not
found in similar devices, that can be used to prevent compression of the
shoulders when using a flexible stretcher. The OSS II folds into an extremely
small package and slips inside a rolled-up Sked Stretcher in its backpack bag,
adding no volume to the Sked Rescue System package.
Each Oregon Spine Splint II (OSS II)
comes with:
OSS II Main Body - this durable
device includes color coded straps and buckles, crossing upper chest straps
and liberal use of hook and loop material for reliable connection of
immobilizing accessories.
Collar Strap - Designed to immobilize
the lower part of the head. It is customarily used over a cervical collar
(see below).
Forehead Restraint - another Skedco
innovation that employs disposable replacement non-slip pads (Dispos-A-Pads)
to avoid possible slipping and loss of immobilization. Extra wide and
generous amounts of hook and loop material eliminates the need for taping
the forehead to the device.
Head Pads - This set of one double
and two single 3/4 inch thick head pads are used to maintain proper spacing
between the board and the head. When the patient is laid down it does not
compress.
Dispos-A-Pads - Ten disposable pads
are provided for the Forehead Restraint strap. The pads are replaceable
after each use to prevent possible contamination by body fluids.
Carrying Case - A durable cordura
pack with zippered pocket, for the OSS II and all components.
Instructions - The most comprehensive
instructions provided with any device sold today. Composed with heavy input
by leaders in the emergency medical field, these instructions are more
comprehensive than found in most textbooks. Video available.
OREGON SPINE SPLINT II (OSS)
FACT SHEET
The only vest type device on the market
that meets all of the established criteria for immobilization of the seated
patient.
Easy to train with - comes with
comprehensive, medically correct, and easy to read instructions.
Faster to apply than other immobilizers
Allows defibrillation, EKG monitoring,
and all other pre-hospital diagnostic and treatment procedures without
compromising immobilization.
Immobilizes without compromising
breathing.
Does not allow patient to move up or
down in device, preventing compression and elongation of the cervical spine.
Groin straps do not occlude genitalia
or cause pain when patient is laid down.
Unique collar strap design provides for
maximum immobilization without affecting the free movement of the jaw,
allowing the patient to vomit safely.
Immobilization of head and cervical
spine is extremely good. When used with a SKED stretcher, is the same as a
long backboard.
Shoulder straps can criss-cross upper
chest or be positioned to retract shoulders for clavicle fractures.
Made of better materials and outlasts
competing products. Can be cleaned with common bleach solutions.
Employs non-slip disposable pads on the
forehead restraint.
Extra wide velcro on forehead strap
insures secure immobilization.
Firm flat pads behind the head replace
the common soft neck roll, preventing accidental hyperextension and loosening
of head straps when the patient is laid down.
Compact size for storage requires about
half the storage space required for other vest type devices. Can even be
stored inside a rolled-up SKED stretcher.
The OSS is X-ray lucent - patient can
be x-rayed with the device in place.
When used with a SKED stretcher, allows
extrication from the smallest confined spaces where other devices cannot work.
Please note that, depending on shipment method selected, this item may
incur additional shipping charges. If it does, you will be notified of any
excess charges, for your approval, prior to shipment.
This flotation system maintains the SkedŽ in a nearly vertical position in the water. It is self-righting and keeps the patients head completely out of water, even in rough seas. The side floats and chest pad provide buoyancy sufficient to support two rescuers in the water in addition to the patient, while the lead shot filled ballast keeps the foot end down and the head elevated out of the water. Made in USA.
The SK-600 Basic Foam Flotation System comes with:
Ethafoam Floats (pair) - two rigid ethafoam floats which mount on each side of the SkedŽ Stretcher and provide the ideal amount of buoyancy.
Chest Pad - the chest pad attaches to the front of the packaged patient, not allowing the patient to float in a face down position.
Ballast Weight - a durable bag filled with 15 pounds of lead shot which attaches to the bottom of the SkedŽ with hook and loop fasteners. This causes the SkedŽ to self-right if it capsizes.
Extra Long Handles - a pair of extra long handles is included to help hoist the stretcher up onto a boat or dock.
Retaining Strap - this straps is used to attach the foam floats and chest pad to the SkedŽ Stretcher backpack, allowing the entire system to be packed as a single unit.
The Sked-Evac Tripod extends to ten feet high at the three anchors that are
available to clip into. Each of the anchors is anodized red for easy
identification and all are equally well-centered to handle a load. The
anchors, header and legs are interconnected with stainless steel bolts to
provide maximum strength. The header limits the distance the legs can
spread. When at full extension this tripod allows you to bring the patient in
a stretcher completely out of the hole. It is rated to handle an NFPA rescue
load. Included with the tripod is a chain that passes through the feet to
provide greater strength and stability. The chain will not degrade in acids or
chemicals like nylon straps or ropes. The legs are adjustable in 5 inch
increments and Skedco provides safe working load data for each tripod
height on each tripod. Brackets are available for mounting most popular
winches. Made in the USA.
Please note that, depending on shipment method selected, this item may
incur additional shipping charges. If it does, you will be notified of any
excess charges, for your approval, prior to shipment.